Rolex is a successful luxury watch brand that has been around since 1902, producing high-quality Swiss watches. Owning one means you are responsible for keeping your time as accurate as possible.
In this article, we’ll look at the best watch winders for Rolex. We’ll discuss the products that can handle such delicate timepieces, preserving their quality and helping with accuracy.
Is Wolf Design a good watch winder for Rolex?
Rolex has prided itself as a reputable and luxurious watch brand since its humble beginnings. WOLF is similar in this regard, as they greatly value the satisfactory quality of their meticulously made products. They imbue technological innovations and elegant aesthetics to create luxury accessories that fit a luxury timepiece like Rolex.
For over 180 years and through 5 generations, WOLF has continued leading the way for modern innovations and is a premier name in luxury jewelry accessories, watch boxes, and watch winders. It complements the qualities of Rolex as a luxurious watch brand. Coupled together, they are elegant, classy, luxurious, and fit excellently with each other.
Wolf Heritage
WOLF 270002 Heritage Single Watch Winder with Cover, Black
Pros:
- Elegant and contemporary design
- Gives off a sleek and expensive feeling for its faux leather and faux suede
- Patented technology provides efficient rotation
- 3 rotational options are available
- Nylon gears provide a silent operation
- Can run on batteries or while plugged
Cons:
- Cuff size may be too big for some watches (but it’s not a huge issue)
- The case itself may seem big
The WOLF 270002 Heritage single-watch winder is an elegant choice for your Rolex. It is a luxury leather watch winder with a comfortable and stylish case. It offers its patented technology to ensure an accurate and delicate movement to maximize comfort and efficiency for your timepiece.
The design of the WOLF 270002 Heritage is elegant and contemporary. It features a black rectangular case with a faux leather exterior and a tempered glass cover to show the timepiece being wound inside. The watch cuff is made of faux suede, finishing off the complete aesthetic of the watch winder.
For the mechanism of the watch winder, it can operate clockwise, counter-clockwise, and bi-directional. It functions with erratic movement, equipped with pause and sleep phases to protect the mainspring of the timepiece.
Specifications:
|
WOLF 270002 Heritage Single Watch Winder with Cover, Black | |
| Exterior | Black Faux Leather |
| Glass Cover | Tempered Glass |
| Interior | Faux Suede |
| Shape | Rectangle |
| Rotation | Programmed 900 turns per day Clockwise, Counter-clockwise, Bi-directional |
| Power | 3.3V adapter, D-cell alkaline batteries, Lithium batteries |
| Motor | Mabuchi |
| Dimensions | 5.375″w x 8.875″d x 6.75″h |
| Storage | 1 winding module |
| Features | Intermittent Rotation 10-second start delay Pause and Sleep phases |
The WOLF 270002 Heritage Single is an excellent choice to showcase a particular Rolex timepiece. It makes the watch stand out because it has a single case. The look and design exude elegance, and the technology behind the winder is undoubtedly high quality. It is a recommended watch winder to keep your Rolex updated and comfortable in its luxurious case.
WOLF 270402 Heritage Double Watch Winder with Cover and Storage, Black
Like the WOLF 270002, the WOLF 270402 is made out of the same build and materials, with this model differing in its capacity to carry two timepieces. It features the same patented technology of WOLF, with the signature faux leather and tempered glass exterior with a faux suede interior. It then fits and showcases two of your Rolex timepieces.
Specifications:
|
WOLF 270402 Heritage Double Watch Winder with Cover and Storage, Black | |
| Exterior | Black Faux Leather |
| Glass Cover | Tempered Glass |
| Interior | Faux Suede |
| Shape | Rectangle |
| Rotation | Programmed 900 turns per day Clockwise, Counter-clockwise, Bi-directional |
| Power | 3.3V adapter, D-cell alkaline batteries, Lithium batteries |
| Motor | Mabuchi |
| Dimensions | 12.75″w x 7.75″d x 8.75″h |
| Storage | 2 winding modules 2-piece watch storage Travel case (2-piece watch storage) |
| Features | Intermittent Rotation 10-second start delay Pause and Sleep phases |
Wolf Roadster
WOLF 457356 Roadster Triple Watch Winder with Cover and Storage, Black
Pros:
- Classy and formal look and design
- A sleek aesthetic complemented by wood veneer design
- Patented technology for its rotation
- 3 rotational options with different turning options
- Backlit LED lights up to guide you while setting the winder
- Can run on batteries or while plugged
Cons:
- The cuff size may be too big as it accommodates large watches as well
- May be confusing to use at first for its multiple settings
The WOLF 457356 Roadster triple watch winder is another offering from the company, with a few differences from the WOLF Heritage Series. The Roadster has larger winders and can accommodate more timepieces depending on the product. This one can accommodate 3 Rolex watches, highlighting the 3 of your favorite timepieces that need to be wound.
The design of the WOLF 457356 is classy and formal. It dons a black pebble faux leather with a tempered glass window for viewing the three timepieces inside. An ebony Makassar wood veneer faceplate complements the view with its dark, striped features. Together, the watch winder’s exterior and interior look complete the overall look for a sophisticated look for your Rolex while being wound.
The internal works of the watch winder are also intricately made. The rotation can be clockwise, counter-clockwise, and bi-directional. You can set the rotation options of your preferences from 300 to 1200 TPD. A backlit LCD screen lights up for 10 seconds when the control knobs are touched.
Specifications:
| WOLF 457356 Roadster Triple Watch Winder with Cover and Storage, Black | |
| Exterior | Black Pebble Faux Leather |
| Glass Cover | Tempered Glass |
| Interior | Makassar wood veneer |
| Shape | Rectangle |
| Rotation | Can be set at 300 to 1200 turns per day Clockwise, Counter-clockwise, Bi-directional |
| Power | 3.3V adapter, D-cell alkaline batteries, Lithium batteries |
| Motor | Mabuchi |
| Dimensions | 17.75″W x 8″D x 9″H |
| Storage | 3 winding modules 5-piece watch storage Travel case |
| Features | Intermittent Rotation Start delay option from 6-72 hours Backlit LCD screen |
The WOLF 457356 Roadster Triple is an excellent choice if you want something different with a beautiful design. It can accommodate 3 Rolex watches and has multiple settings, ensuring your beloved watches are wound as accurately and comfortably as possible. It is more expensive than the Heritage series for its additional settings but worth its price.
WOLF 459156 Roadster Four Piece Watch Winder with Cover, Black
The WOLF 459156 Roadster differs in that it offers four watch winders and removes the storage space from its rectangular shape. It is solely powered by AC power and features a backlit LCD that lights up at 20 seconds upon tweaking the control knobs. It also features the patented WOLF technology to assure quality winding for your Rolex timepieces. You can tweak individual options to create 57 settings.
Specifications:
| WOLF 457356 Roadster Triple Watch Winder with Cover and Storage, Black | |
| Exterior | Black Pebble Faux Leather |
| Glass Cover | Tempered Glass |
| Interior | Makassar wood veneer |
| Shape | Rectangle |
| Rotation | Can be set at 300 to 1200 turns per day Clockwise, Counter-clockwise, Bi-directional |
| Power | 3.3V adapter |
| Motor | Mabuchi |
| Dimensions | 10.75”L X 6”W X 13”H |
| Storage | 4 winding modules |
| Features | Intermittent Rotation Start delay option from 6-72 hours 57 personal programmable options Backlit LCD screen |
WOLF 459256 Roadster Six Piece Watch Winder with Cover, Black
With six watch winders, the WOLF 459156 Roadster is a heavyweight for showing off your collection of Rolex watches. An AC connection solely powers it, and has a backlit LCD display that lights up for 20 seconds upon using the winder. It can accommodate large timepieces and lock them in their place during wounds. It also has 57 programmable combinations for flexibility.
The WOLF 459156 Roadster differs in that it offers four watch winders and removes the storage space from its rectangular shape. Its backlit LCD display lights up at 20 seconds upon tweaking the control knobs. It also features the patented WOLF technology to assure quality winding and comfort for your Rolex timepieces. You can set individual options to create 57 personal programming options for flexibility.
Specifications:
| WOLF 457356 Roadster Triple Watch Winder with Cover and Storage, Black | |
| Exterior | Black Pebble Faux Leather |
| Glass Cover | Tempered Glass |
| Interior | Makassar wood veneer |
| Shape | Rectangle |
| Rotation | Can be set at 300 to 1200 turns per day Clockwise, Counter-clockwise, Bi-directional |
| Power | 3.3V adapter |
| Motor | Mabuchi |
| Dimensions | 15.75”L X 6.5”W X 13”H |
| Storage | 6 winding modules |
| Features | Intermittent Rotation Start delay option from 6-72 hours 57 personal programmable options Backlit LCD screen |
Is Orbita a good watch winder for Rolex?
As Rolex continues to advance with continuous research, development, and innovation, it adapts to the current needs of people with the advance of the times. Orbita, though young, has proven itself to be a competitive watch winder brand. It combines a robust youth and a thirst for innovation to meet the needs of winders to delicate and luxurious timepieces such as those from Rolex.
Founded in 1996 in North Carolina, Orbita was a young competitor for watch winder products. They excelled in their research and development, putting their products at par with most luxurious watch winder brands for their meticulous attention to detail, delicate operation for delicate timepieces such as Rolex, and attractive look and design that makes them pleasing to the eye.
Orbita Sparta
Orbita Sparta Bold Single Watch Winder
Pros:
- Modern and classy style that has a unique attractive look
- Fits casual settings and even formal places
- Lightweight and compact design
- Patented technology for its movement
- Programmable options
- Utilizes gravity for its swinging and for saving battery
- Can run on batteries or while plugged
Cons:
- Lightweight design makes heavy timepieces imbalance it
- Some users dislike the lack of detailing
- Does not have any protective cover
An entry-level watch winder from Orbita, the Sparta Bold single watch winder is an excellent offering from the company. It is a good start-off point and reference for your Rolex’s first-watch winder. As Orbita excels in its attention to detail and aesthetics, this watch winder shows this potential and highlights the beauty of your Rolex watch.
As for the design of the Orbita Sparta Bold, it is modern and classy at the same time. The contemporary look is emphasized by the aesthetics brought about by its playful sloped rectangle design, giving your Rolex much-needed attention. Its monotonous color scheme is a classy choice that adds character and emphasis to the Rolex watch you want to feature.
As for its mechanism, the Orbita Sparta Bold boasts its innovations. For its movement, it swings gently rather than rotates, mimicking the normal movement of the wrist. It has a built-in microprocessor that activates a servomotor to swing for several oscillations. It has a programmable switch for its winding cycles for either 10 or 15 minutes.
Along with WOLF 270002, Orbita Sparta is an excellent single-watch winder for Rolex. Both producers are top-watch winder brands in the market now!
Specifications:
| Orbita Sparta Bold Single Watch Winder | |
| Exterior | Powder-coated, textured aluminum frame |
| Glass Cover | Not applicable |
| Interior | Not applicable |
| Shape | Sloped Rectangle |
| Rotation | Swings, does not rotate |
| Power | AC wallplug, D-cell alkaline batteries, Lithium batteries |
| Motor | Rotorwind |
| Dimensions | 5.8″ L x 9.5″ W x 4.2″ H |
| Storage | 1 winding module |
| Features | Patented swinging motion Programmable winding cycle of 10 or 15 minutes Battery-saving technology utilizing gravity |
The Orbita Sparta Bold Single watch winder is a unique choice for those who want a modern equipment to feature and wind their favorite Rolex watch. It has a few basic settings to choose from, ample enough for an entry-level watch winder. It fits a lot of sizes so it’s not a problem if you have a small or large Rolex, and the motion of the winder makes the watches comfortable and minimally shaken for its safety.
Obita Sparta 2 Watch Winder in Bold Black
The Orbita Sparta 2 watch winder is similar winder to its single counterpart. Its only difference is that it can accommodate two featured timepieces, depending on what you want to use. It can still support different-sized watches to wind any Rolex watch you prefer. It can swing in 10 or 15-minute settings with about 900-950 TPD and 750 TPD, respectively.
Specifications:
| ORBITA Sparta 2 Watch Winder in Bold Black | |
| Exterior | Powder-coated, textured aluminum frame |
| Glass Cover | Not applicable |
| Interior | Not applicable |
| Shape | Sloped Rectangle |
| Rotation | Swings, does not rotate |
| Power | AC wall plug, D-cell alkaline batteries, Lithium batteries |
| Motor | Rotorwind |
| Dimensions | 9.5” W X 5.8” D X 4.2” H |
| Storage | 2 winding modules |
| Features | Patented swinging motion Programmable winding cycle of 10 or 15 minutes Battery-saving technology utilizing gravity |
Sparta Insafe
Sparta InSafe Four Watch winder by Orbita Model W21500
Pros:
- A sophisticated and formal watch winder
- Can be placed on storage for long periods of time
- Fits formal places with its elegant design
- Patented technology for its movement
- Programmable options
- Utilizes gravity for its swinging and for saving battery
- Has 5-year lithium batteries
- Can stand using a pedestal or wall-hung by removing the pedestal
Cons:
- Can only be used with batteries
- Does not have any protective cover
If you want a more sophisticated and formal watch winder from Orbita, the Sparta InSafe four-watch winder is another option for you to consider. It is an elegant and sophisticated watch winder that exudes luxury with its rectangular shape and bicolor scheme. You can place 4 of your precious Rolex timepieces, and it is built to store your timepieces in a vault or display them in an allocated space.
The design of the Sparta InSafe is sophisticated and formal. It is a black rectangular watch winder that can store four timepieces, with two at the top and two at the bottom. It has a bicolor scheme makes it suitable for many settings where you can place it. The exterior is of black vinyl finish, with the interior having a soft cream suede finish. This emphasizes the beauty of your featured Rolex watches.
The watch winder works primarily to keep your Rolex watches moving for a long time. The watch winder aims to work well over a few years with its batteries, making it perfect for storing the watch winder and its timepieces for years. It has a main switch for its overall operations and several individual ones for the four winding modules.
Specifications:
| Sparta InSafe Four Watch Winder by Orbita Model W21500 | |
| Exterior | Black Vinyl Finish |
| Glass Cover | Not applicable |
| Interior | Soft Cream Suede Finish |
| Shape | Rectangle |
| Rotation | Swings, does not rotate |
| Power | D-cell Lithium batteries |
| Motor | Rotorwind |
| Dimensions | 10.0” W X 7.0” D X 11.5” H |
| Storage | 4 winding modules |
| Features | Patented swinging motion Programmable winding cycle of 10 or 15 minutes Can be placed on a pedestal or wall-hung |
The Sparta InSafe four-watch winder is an excellent choice if you opt to store your precious Rolex timepieces in a safe and comfortable container. This watch winder does that and winds the watches so that they don’t get too out of time in case you may want to use one of the watches again. You can also use the watch winder even if it isn’t stored, similar to the usual watch winders.
Orbita Insafe Watch winder Black 6
The Orbita InSafe, a six-watch winder, differs from the last winder through the number of timepieces it can keep and the interior color scheme. This watch winder can accommodate and store up to six Rolex timepieces and is ideal for long-term storage for your beloved collection. The black interior leans to the more formal style as it completes the monotonous focus of this winder.
Specifications:
| Orbita Insafe Watch Winder Black 6 | |
| Exterior | Black Vinyl Finish |
| Glass Cover | Not applicable |
| Interior | Black Suede Finish |
| Shape | Rectangle |
| Rotation | Swings, does not rotate |
| Power | D-cell Lithium batteries |
| Motor | Rotorwind |
| Dimensions | 19.0” W X 14.0” D X 20.0” H |
| Storage | 6 winding modules |
| Features | Patented swinging motion Programmable winding cycle of 10 or 15 minutes Can be placed on a pedestal or wall-hung |
How to choose a good watch winder for my Rolex? (Buying guide)
Nowadays, watches aren’t just a timepiece with the sole function of telling time. For example, a high-end Swiss watch, Rolex, is a universal sign of luxury, prestige, and success. Rolex, one of the most phenomenal watchmakers in the world, never fails to satisfy its loyal customers with elegant, classy models.
It costs a fortune to own one or two Rolex watches. Maintenance and preservation are required to keep your Rolex in shape. Better than a watch case, watch winders provide solid protection and the ability to maintain the function of the watch.
Yet, finding a good watch winder when you own a Rolex can be challenging. Below are essential features you should look for when shopping for a winder.
Now, if you are a total newbie in the watch winder world, then there are some terms you need to get yourself familiar with.
- Rotor Winding Direction: there are often three directions: clockwise, counter-clockwise, bi-directional
- Turns per day refers to the number of turns the rotor makes to keep your watch 100% wound.
Next, ask yourself directional questions. These questions will help you determine suitable watch winders.
- Do you want to programmable turning direction or not?
- Can you set the winder to a particular amount of winds a day?
- Should you choose an AC power source or battery powered one?
- Is there any weight consideration when you buy a watch winder?
Programmable watch winders
When buying a watch winder, I always look at the specs first. It is the only reliable source for you to make the right decision. The specification table will tell you whether the winder is programmable or not.
For Rolex watch owners, buy a programmable winder since it has a handy feature. You can pre-set both the rotor winding direction and the turns per day.
Power source
There are two options for you: AC or DC.
AC power source receives power through a power cord and a wall socket. That means you can’t be flexible with the placement of your winder.
However, if you need a multiple-head winder, it will be better to use AC-powered winders.
DC-powered winder receives power through batteries. I highly recommend using DC-powered winders for those who need to move from place to place. They are often small, easy to use, and mobile.
Orbita Corporation, for example, offers models powered by a 5-year lithium battery! So you don’t have to worry about buying new batteries occasionally.
Other things to keep in mind
For some people, a watch winder isn’t only used for wind watches and house decoration. If so, design is an essential factor. Pay attention to the materials and finishes.
One doesn’t just stop with a single Rolex watch. If you plan to expand your Rolex collection, buying a multiple-head winder may be wiser.
FAQs
How do I set my watch winder for Rolex?
Rolex watches require a minimum of 650 TPD (27 turns per hour) to be fully wound for the day. Most watch winders can be set near that amount, with 750 TPD being the usual nearest setting for most timepieces. The difference minimally affects the watch as it is above the bare minimum and is considered a normal TPD for the watch to keep track of its time.
Take note that most watch winder owners make the mistake of winding their watches incorrectly, and thus results in a Rolex not fully wound. The best way to maximize the watch winder is by manually winding your Rolex before putting it in the machine. This way, it starts at its maximum, wears down in time, and will be wound up again by the winder. The watch can then be left alone.
How long should a Rolex Submariner be on a watch winder?
The Rolex Submariner is a famous timepiece that many watch enthusiasts occasionally use on special dive days. This makes the watch prone to stopping because of the infrequency of use. The Submariner has the 3135 caliber, a bi-directional motor that requires at least 650 turns per day.
Fortunately, most watch winders can provide about 750 Turns daily, more than the required minimum of Rolex Submariners. This makes the daily winding sufficient for the timepiece. However, it is recommended to wind only at the nearest TPD of the winder to the required TPD of the Submariner so that extra wear and tear can be avoided.
As long as you keep the TPD of the winder and the required TPD of the Submariner as close as possible, you can rest assured that it will not harm the watch. It is also good to note that you can never overwind a Rolex watch because its slip clutch protects the mainspring. Though it is similar to being worn, there is slight wear and tear because of the timepiece’s movement.
What direction should I set my watch winder for Rolex?
Is there a so-called optimum direction setting for Rolex watches? My answer is no. It depends on how the watch is designed. However, most Rolex automatics can be wound either clockwise or counterclockwise.
So far, Daytona houses Cosmograph 4130, which requires to be wound counterclockwise only.
Is it bad for automatic watches to stop?
While wearing an automatic watch brings lots of enjoyment, it also bombs us with questions about the movement. One common issue for all automatic watch wearers is “Is it bad for automatic watches to stop?”
Here is all you need to know.
Sometimes you need to remember to wind the watch. When it fully unwound, the automatic watch will stop. Fortunately, it doesn’t mean that your watch is broken or so. When mechanical watches stop working, it is often a sign to rewind them.
As you may know, the mainspring is responsible for the watch movement. It can’t sustain the watch movement when it is unwound. The watch’s escape wheel receives no power to work with the pallet fork, which attributes to the balance back-and-forth motion.
As soon as the balance wheel movement stops, your watch also stops. When you want to wear it again, merely wind it; it will be good to go.
How long does a Rolex stay wound?
Most modern Rolex watches, except the Oyster quartz models, feature a self-winding mechanism that winds your watch according to movement.
This mechanism only works when you wear your watch daily. Once you stop wearing it, let’s say the mechanism can’t function for seven days, and you need to wind it manually.
When you read Rolex watches’ specs, you can see that the company refers to this mechanism as a perpetual movement. When the perpetual-movement watch is wound, it can stay 48 hours without being worn.
After 48 hours, you need to rewind it 30 to 40 times and wear it again.
Can you manually wind a Rolex?
Yes, you can manually wind a Rolex by following these simple steps:
- Unscrew the crown so that it pops into position. Remember not to pull.
- In this position, you can manually wind the watch by turning the crown clockwise.
Leave a Reply